Carrying Accessories
Results: 165
Bottle and Stainless Steel Quick Cage
The Bottle and Stainless Steel Quick Cage is a wheelchair drink holder or cup holder designed for use by individuals who use wheelchairs, walkers or crutches. This stainless steel water bottle cage mounts to any vertical or horizontal tube, rail, or pole using an attached flexible plastic mount and a hook-and-loop strap. The unit includes a 21-ounce water bottle with the Twofish unlimited insignia.
10-Inch Scooter Bag (Model 70300)
The 10-inch Scooter Bag, model 70300, is a carrying bag for three-wheel scooters designed to hang from the handlebars on the tiller. This bag features a spring action hex frame opening to allow easy access to all items in the pouch. Opening the caddy requires placing the fingers in the middle of the frame and popping it open; closing the frame is achieved by pushing on the outside of the frame. Very little manual dexterity or strength is required to operate the opening. The bag is made of coated
13-Inch Armrest Bag (Model 70320)
The 13-inch Armrest Bag, model 70320, is a wheelchair side pouch designed for use on three-wheeled scooters. The caddy attaches to the arms using side release clips. This lined bag is made of coated nylon Cordura and features a spring-action hex frame opening. Opening the frame requires placing the fingers in the middle of the frame and popping it outward; closing the frame is achieved by simply pushing on the outside of the frame. Very little manual dexterity and strength are needed to operate.
13-Inch Sling Bag
The 13-inch Sling Bag, model 70040, is an underseat pocket designed to provide easy access and an unobstructed view of any items stored in this carrying bag to manual wheelchair users. The caddy is large enough to hold many daily needed items such as medicines, personals, writing instruments, paper, etc. The bag comes standard with a main compartment, pen and pencil pouch, and a small front pouch. The bag features a spring-action, hex frame opening which can be opened by placing the fingers in t
1800Wheelchair Large Wheelchair Bag
The 1800Wheelchair large wheelchair bag is designed for people with mobility disabilities who use wheelchairs. The bag attaches to the back of a wheelchair allowing a user to access their items from one of two pockets. To set up, slide the top bag straps over back push handles and tighten. The item includes quick-release plastic clips for easy-on, easy off action. This large bag can attach to most wheelchairs and scooters. The bag includes a handle on top for carrying while not attached. The bag
8-Inch Beverage Bag (Model 70020)
The 8-inch Beverage Bag, model 70020, is a caddy for attachment to wheelchairs designed to accommodate liquid containers, school or art supplies, and other items. The lined bag will holds 1 or 2 cans of soda or other drinks, sports bottles, and coffee mugs. Made of coated nylon, the caddy affixes to the wheelchair tubing with a 3-inch piece of adhesive Velcro strapping (included). The bag features a spring-action hex frame opening which can be opened by simply placing the fingers in the middle o
9-Inch Security Pouch (Model 70000)
The 9-inch Security Pouch, model 70000, is a wheelchair side pouch designed to be attached under the armrest to prevent theft of valuables and money. The flap-style pouch is secured with heavy webbing, and made of 400 Denier coated nylon packcloth. This lined carrying bag will accommodate a calculator, writing utensils, change purses or small wallets, etc. DIMENSIONS (WxH): 10 x 6 inches. COLOR: Royal blue, magenta, teal, grey, black, and burgundy.
Adalap
The ADALAP is a lap desk designed for use by individuals who use wheelchairs. The basic unit includes the base and pole with a top plate with a Velcro loop. Made from lightweight anodized aluminum alloy with stainless steel fasteners, the unit has a base that slides right under the wheelchair seat cushion. Height adjustment is accomplished with a quick-release clamp.OPTIONS: Fresh or salt water fishing rod holder; Snap Lap Desk; Lap Shopper shopping basket; lap tray; accessory mount for camera,
Arm Tote (Models Ez0123 & Ez0124)
The Arm Tote is a wheelchair or scooter side pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of nylon, this pack attaches to the armrest of a wheelchair or scooter with the two adjustable straps with plastic fasteners. An inner pocket can be accessed by opening a full-length zipper. There are two (model EZ0124) or three (model EZ0123) pockets on the outside. SIZES: Large (model EZ0123) and small (model EZ0124). DIMENSIONS (HxLxW): 2 x 14 x 10.5 inches
Arm-A-Rest
The Arm-a-Rest is a carrying caddy designed for attachment to all wheelchairs with arm and/or back support. The pouches are fabricated of water repellant and stain resistant crushed velvet and drape over either the armrest or the back of the chair. The armrest version has a padded section which rests on top of the armrest pad; the bag storage version has a padded section which provides back support. The pouches attach with hook and loop strips. OPTIONS: A cushioned arm and storage pouch; a cushi
Backpack Retriever
The Backpack Retriever is a wheelchair back pouch access aid designed for use by individuals who use wheelchairs. This device brings a backpack from behind the chair to within reach of the user with a click of a button. Without increasing the overall dimensions of the wheelchair, the unit is aesthetically designed to fit most power wheelchairs and does not interfere with accessibility through doorways. The patented linkage mechanism enables the device to be used in close or confined areas such a
Basket For Wheelchair
CUSTOM ADAPTATION PURPOSE: To enable individuals with mobility disabilities to shop and carry items. Designed for use on a variety of wheelchairs, the adaptation consists of a commercially-available plastic-coated wire basket that fits against the back of the chair between the rear wheels. The basket is secured to the chair with octopus straps to enable removal when not in use but keeping the basket from swinging when on the chair. TITLE: In the Basket. JOURNAL: TAD Journal. REF: Vol. 21 no. 2,
Big Ben Shopper
Wheelchair back pouch attaches to handgrips of wheelchair with straps. Room for complete change of clothes, lap robe, or other large items. 16 by 17 inches. Black or saddle. Vinyl.
Cargo 16 Wheelchair Pouch
Wheelchair back pouch. Cordura nylon fabric with look of cotton duck. 1, 000 cubic inches inner space. Removable shoulder strap. Full width outer and back pockets. Zipper opening top. Strap loops on pouch slip over wheelchair push handles folds with wheelchair. Specify narrow or regular wheelchairs, 12 to 14 inches wide.
Carriers For Crutches And Tripod
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adapted crutches and tripod carriers for an adult with spastic paraplegia and oral dyspraxia. The crutch holder accessory available from the wheelchair manufacturer was too small for the tripod and would be difficult to import from the United States. The custom adapted design began by taking an aluminum base panel and bolting it to the anti-tip legs on the back of the chair. To make the holders for the crutches and the tripod, pla
Carry All Pouch (Model 976)
The Carry All Pouch, Model 976 is a wheelchair and walker carry-all with four accessible pockets. The pouch is secured with Velcro fasteners over the front of the arm of a wheelchair or a walker bar. DIMENSIONS: 9.5 x 1.25 x 13 inches.
Carry All Pouch For Walker (Model 1116)
The Carry All Pouch for Walker, model 116, is a carrying bag made of blue denim designed to attach to the side of a wheelchair or walker. The pouch has one inside pocket and 3 outside pockets with velcro closures.
Carrying Aids For Wheelchair
CUSTOM ADAPTATION PURPOSE: To enable an individual with quadriplegia to keep essential items at hand while in his wheelchair. Three carrying aids were made and attached the left arm of the wheelchair. The first was a carrying pouch for a cell phone. Made of metal, the pouch is lined with vinyl to protect the phone from damage. The second was a small, flat metal tray to carry the remote control for operating the front door. Also added to the arm was a pocket made of vinyl to carry the hadset for
Carrying Aids For Wheelchairs
DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with Friedrich's ataxia to carry staws and plastic bags with her. To ensure straws are available when needed, carry them in a round plastic toothbrush holder fastened with Velcro to the underside of one arm of the wheelchair. To ensure a supply of plastic bags are available for garbage, snacks, or clean-up bags, hooks dog clean-up bags in the dispenser they come in to the wheelchair. MATERIALS: Toothbrush holder, straws, dog clean-up bag
Catch-All (Model Wh190)
The Catch-All WH190 is a under seat net pocket designed for individuals who spend long periods in wheelchairs. Designed for use with rigid ad folding wheelchairs, this device securely attaches with Velcro hook and loop to the bottom horizontal and rear vertical frame tubing forming a catch all net shelf under the wheelchair seat. DIMENSIONS: The widths ranges are 10, 11 to 14, 13 to 18, and 17 to 24 inches. COLOR: Black.
Chairmate Cup Holder/ashtray Holder (Model F70622-0000)
The Chairmate Cup/Ashtray Holder, model F70622-0000, is a wheelchair drink holder designed for use by individuals who use wheelchairs. The unit features a double-well cup holder and a removable ashtray. The deeper well has a pop-out bottom that accommodates most glasses and cups. The unit can be attached vertically or horizontally on the right or left side of any chair, metal frame-bed, or tubular frame wheelchair bar from 1/2 to 1.25 inches in diameter. DIMENSIONS (LxWxD): 7.75 x 6.25 x 1.75 in
Chart Holder (Model 93)
The Chart Holder, Model 93 is vinyl pouch sewn to the back of the wheelchair upholstery. It may be used for carrying charts and papers. OPTIONS: Identification stencilling is available.
Clamp-On Cup Holder (Model 16C035)
The Clamp-On Cup Holder, model 16C035, is a wheelchair drink holder designed for use by individuals who use wheelchairs. This device attaches to most wheelchairs. Once the attachment clip (included) is installed onto the chair, the cup holder itself can be removed as needed. There are no tools required. DIMENSIONS: Attachment clips fit 7/8 and 1 inch tubes.
Clip-On Glass Holder (Model F74576)
The Clip-on Glass Holder, model F74576, is a drink holder designed to be attached to a wheelchair frame, commode, or other tubular frame haveing a diameter of 0.75 to 1 inch. This helical spring-wound wire holder has a baked-on enamel finish and a plated clip. DIMENSIONS: 2 7/8 inch inside diameter x 3 inches high.
Combo Walker / Wheelchair Bag (Model 6434)
The Combo Walker/Wheelchair Bag is a carrying bag or caddy for use by people who use wakers or wheelchairs. The denim bag features four pockets ataches to the front walker bar or wheelchair arm using the attached straps. DIMENSIONS: 13 x 9.5 inches. COLOR: Blue.
Continental Back Pack
The Continental Back Pack is a wheelchair back pouch designed to attach to the chair's handgrips with straps. An inner pocket has a top zipper closure, or a flap with a velcro closure. One large and two small outer pockets are included for access to smaller items. DIMENSIONS: 16 x 16 inches. COLOR: Black or saddle vinyl.
Crutch Bag For Wheelchair
The Crutch Bag for Wheelchair is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a wheelchair. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a wheelchair and fits one pair of crutches in an upright position. It has an outer pocket for additional items and a flap with a Velcro closure. DIMENSIONS (HxWxD): 20.5
Cup Holder
DO IT YOURSELF PURPOSE: To provide powered wheelchair users with the ability to carry beverages. A cup holder designed to clamp to an automotive air vent can be adapted for use on a wheelchair. Zip ties can be used to secure the holder squarely to the frame where it works best for the user. TITLE: Cup Holder. REF: http://www.wheelchairmodifications.org. The organization can also be reached at Wheelchair Modifications, 5533 A Pony Farm Drive, Richmond, VA 23227.
Cup Holder
The Cup Holder is a wheelchair cup, glass, mug, or can holder designed to allow individuals who do not have the use of their hands to drink through a straw from his/her own cup without assistance. The plastic adjustable cup cradle is fixed to the top of a 10 mm stainless steel rod. The rod is mounted onto the wheelchair arm with a plastic connector. The cradle has two openings on either side for a mug handle and will accommodate a wide variety of drinking containers, allowing the user to use a p
Cup Holder 1
DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with quadriplegia to drink independently. This cup holder is made using a flexible gooseneck microphone stand with fittings at each end, a machined clamp that fits the wheelchair armrest, a piece of black PVC drain collar, and fence wire. The PVC collar has a notch cut into the side of it to hold a thermal coffee cup, and a wire cage
was added below to hold most juice bottles and soda cans. A piece of fencing wire is placed inside the go
CutiePie
The Pie Bag is a carrying bag for a walker or a wheelchair back pouch designed to enable persons with mobility disabilities to transport personal items. The top stabilizers fit a wide variety of wheel sizes, spoke configurations, walker, bicycle, and scooter options. It is waterproof and washable. Other features include:
Cylinder Rack (Model De-1-W)
The cylinder rack is a cylinder cart for wheelchair that fits on back of wheelchair attached with small wrench Nylon screw on holding ring secures cylinder in place. It holds D or E cylinders and has bright chrome plating. Does not interfere with operation of chair. (IV Pole not included).
Day Cruiser Mini Pack
The Day Cruiser Mini Pack is a wheelchair side or legrest pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made from water-resistant heavy-duty Cordura with a full lining, this pack attaches to the armrest or legrest of a wheelchair with two Velcro straps, which are sewn on the back of the unit. It can also be worn around the user's neck. The pack has two compartments, an adjustable neck strap, and a sewn-on elastic loop on the side to carry glasses or a pe
Day Cruiser Wheelchair Bag
The Day Cruiser Wheelchair Bag is a wheelchair back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made from water resistant heavy-duty Cordura with a full lining, this backpack attaches to most wheelchairs with or without push handles with two adjustable straps. The backpack has two compartments, a large main area with Velcro flap closure and an expandable zippered front pocket for smaller items. Power chair users must have handles to attach the bag. DIM
Deluxe Down-Under (Model Wh175) & Junior Down-Under (Model Wh175J)
The Deluxe Down-Under WH175 and the Junior Down-Under WH175J are removable under seat pockets designed for use by wheelchairs users. The bags have one main compartment and an additional outside pocket suitable for carrying a checkbook, wallet, small book, wheelchair tools etc. The pockets have zip closures with large pull rings. The Junior Down- Under is sized for small chairs. DIMENSIONS (WxHxD): Deluxe Down-Under - 11x7x3 inches; Junior Down-Under is 9x7x3 inches. COLOR: All black or black wit
Deluxe Saddle Armrest Bag
The Deluxe Saddle Armrest Bag is designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The bag straps over the user's scooter or wheelchair armrest to provide a handy storage area for keys, wallet, cell phone, glasses. The storage bag is designed with side pockets and a zippered interior pocket that keeps personal belongings. Additionally, the bag can be mounted to inside or outside of armrest.
Depends Holder Bag (Model St107)
The Depends Holder Bag, model ST107, is a carrying bag designed for attaching to a wheelchair for individuals who use a wheelchair. This bag provides easy on/off handling and is made from light weight canvas. OPTIONS: Silk screening with your logo or message in a variety of colors is available upon request. DIMENSIONS: 16 x 24 with a 5.5 inch gusseted bottom. COLORS: Body color comes in natural. Assorted webbing and trim colors are available.
Diestco Armrest Front Bag
The Diestco Armrest Front Bag is a caddy for a scooter or powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This large basketball-shaped and sized bag mounts to the end of armrests with the included straps and is detachable when not in use. Made of water-resistant nylon, this bag has a lightweight aluminum frame to retain the shape and a zippered top cover. DIMENSIONS: 7 inches high x 12 inches in diameter.
Diestco Armrest Pocket
The Diestco Armrest Pocket is a wheelchair side pocket designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Made of waterproof nylon, the pocket attaches to the wheelchair armrest with the included straps. DIMENSIONS: 11 x 5 x 3 inches.
Diestco Cargo Shelf
The Diestco Cargo shelf is an under seat pocket designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This mesh shelf attaches to the frame of manual wheelchairs underneath the seat with the included hook-and-loop straps. DIMENSIONS(WxD): 15 x 16 inches.
Diestco Deluxe Armrest Saddle Bag (Model B2121)
The Diestco Deluxe Armrest Saddle Bag, model B2121, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment, side pockets, a zippered interior pocket, and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inch
Diestco Deluxe Seatback Bag
The Diestco Deluxe Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, side pockets, and
Diestco Down-In-Front Wheelchair Bag
The Diestco Down-in-Front Wheelchair bag is an under seat pocket desighed for use on manual wheelchairs without armrests. Made of water-resistant nylpn, this single-pocket bag attaches to the lower front frame of the wheelchair behind the user's legs with buckle-closure straps. DIMENSIONS(WxLxD): 11 x 6 x 3 inches.
Diestco Extra Large Armrest Saddle Bag (Model 2131)
The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a front zippered pocket, mesh pockets in front and on the sides, an inside pocket, side loops, and a secret pocket. DIMENSIONS(WxLxD): 12 x 16 x 2 inches.
Diestco Fabric Cane And Crutch Holders (Models B6213 & B6313)
The Diestco Fabric Cane and Crutch Holders are cane or crutch holders for wheelchairs or scooters side pouch designed for use by individuals with mobility, walking, or lower extremity disabilities. Made of water-resistant nylon, this carrier is shaped similarly to a golf bag and is available with a mounting system for use on captain-style scooter seats or wheelchairs without push handles (model B6213) or on wheelchairs with push handles (model 6313).
Diestco Large Armrest Saddle Bag (Model B2125)
The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a variety of pockets and compartments. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.
Diestco Mid-Range Seatback Bag (Model B1117)
The Diestco Deluxe Seatback Wheelchair Bag, model B1117, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, and
Diestco Monster Seatback Bag (Model B1113)
The Diestco Monster Seatback Bag, model B1113, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has a lightweight aluminum frame to keep it open. DIMENSIONS(WxLxD): 13 x 18 x 10 inches.
Diestco Standard Seatback Wheelchair Bag
The Diestco Standard Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag has a zippered top. DIMENSIONS: 12 x 12 x 3 inches.
Diestco Universal Cup Holder
The Dietsco Universal Cup Holder is a wheelchair drink holder designed for use by individuals with mobility disabilities or spinal cord injury. This holder attaches to the wheelchair or scooter armrest with the included mounting hardware.
Down-Under Shelf (Model Wh185)
The Down-Under Shelf, model WH185, is an under seat carrying caddy designed for use by individuals who spend long periods of time in wheelchairs. Designed for rigid wheelchairs, this caddy attaches under the chair with Velcro straps and provides ample space for school books, shopping items, clothing, etc. DIMENSIONS (HxWxD): 4 x 14 x 11 inches. COLOR: Black.
Drink Holder
CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to carry beverages. A chrome-plated curtain rod was used to make a vertical tube system that fits into brackets installed on a wheelchair. A horizontal crossbar supports a plastic container which, in turn, holds a cup or glass that the user can access with a straw. TITLE: Easels, Calling Systems and More. JOURNAL: TAD Journal. REF: Volume 24, Number 4, Summer 2004: P. 16-17. PAGES: 3 (including cove
Drink Holder
The Drink Holder is a wheelchair drink holder designed for use by individuals with lower extremity, mobility or walking disabilities or spinal cord injury. The unit consists of a stainless steel frame with a clamping system for attaching to a chair, crutches or walker. The clamp has a rubber grommet to prevent scratching, along with an adjustable Velcro tightening strap. The holder can be carried in the user's wheelchair bag until it is needed. An insulated beverage jacket is included. It can al
Drinkup Travel Lite
The Drinkup Travel Lite is a wheelchair drink holder with a long straw designed for people who have lower extremity or mobility disabilities and spinal cord injury and grasping, fine motor, upper extremity, severe physical disabilities or upper extremity amputation. The Drinkup Travel Lite consists of a water bottle cage with a bracket so it can be attached to the backrest frame of a wheelchair. It has a semi-rigid flexible arm that extends upward past top of backrest and forward around to the f
Dual Purpose Oxygen Cylinder Holder (Model Cs1200)
The Dual Purpose Oxygen Cylinder Holder, model CS1200, is an oxygen cylinder carrying case designed for use by individuals with respiratory disabilities who use either a wheelchair or a walker. This dual purpose unit allows the user or a caregiver to move oxygen cylinders from a wheelchair to a two-wheeled walker and back. The unit attaches to most two-wheeled walkers and most wheelchairs, including bariatric wheelchairs. The unit is made of polyester with Velcro straps for attaching to the whee
Easy Flex Mount
The Easy Flex Mount is a flexible mount to allow users in wheelchairs to access cups and bottles while in their chairs. Designed with an adjustable Velcro strap that enables the user to access cups and bottles, it also has a flexible tube that can be positioned to meet the needs of the user. The Mount’s easy-to-use clamp attaches to wheelchairs, tabletops, strollers and high chairs
Eight-Ten Pac (Model Wh810)
The Eight-Ten Pac is an under seat pocket carrying accessory designed for use by individuals who spend long periods of time in a wheelchair. This carrying aid attaches to the frame of wheelchairs and hangs under the seat behind the user's legs. Features include SR-ADST Side Release Adapt A Straps system for quick attachment and detachment, and a large circular custom pull ring for easy detection and opening. This bag is made in the USA of highly durable nylon fabric with nylon tape bonded seams.
Endurance D / E Cylinder Holder For Wheelchairs (Model R103E)
The Endurance D/E Cylinder Holder for Wheelchairs, model R103E, is a cylinder cart for wheelchairs designed for use by individuals with mobility and respiratory disabilities. Made of chrome-plated steel, this carrier attaches to the seat back uprights of most wheelchair brands and accommodates D and E size oxygen cylinders.
Flat Pac (Model Wh180)
The Flat Pac WH180 is a under seat pocket designed for use by individuals who spend long periods of time in wheelchairs. This seat pocket permanently attaches to the underside of a wheelchair seat with Velcro where it is hidden for added security. The seam is stitched down the center of the bag so the chair can be folded without articles getting in the way. The Flat Pac has a pocket for keys and a double zip closure with large pull rings. DIMENSIONS (WxD): 14 x 11 inches.
Fleece Wheelchair Armrest Pouches
The Fleece Wheelchair Armrest Pouches are wheelchair armrest pads and side pouches designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. The pouches are made of washable denim and feature fleece armrest covers that provide comfort and protection to elbows and wrists. The armrest pouches can be mounted over wheelchair arms with Velcro fasteners. Each pouch features a convenient storage compartment for carrying books, ma
Freedom Wheelchair Cup Holder
The Freedom Wheelchair Cup Holder is a wheelchair drink holder designed for use by individuals who use wheelchairs. Available for square or round tubing, this holder can also be used on scooters, walkers, rollators, and bed rails. The attached clamping mechanism tightens securely on any upright or horizontal tubing. To use, open the holder and adjust the holder's arms to hold 16- to 46-ounce cups, mugs, glasses or bottles with up to a four-inch diameter base. The holder closes flat when not in u
Hangin Out Bag (Model 160)
The Hangin Out Bag, model 160, is a wheelchair backpack or carrying bag for walker designed for use by individuals with walking or mobility disabilities. Available in cordura nylon or heavy denim, this bag is equipped with wide patterned or solid polyester webbing with black plastic side release buckle belt for hanging from U-shaped handles, wide armrests, walkers, or chairs that have no push handles. A top bag flap is also featured for monogramming. Other features include a single inner compart
Have-A-Tray Carrier (Models 70612-3200/3400/6100)
The Have-A-Tray Carriers are caddys for wheelchairs, walkers, and crutches. The two-compartment carriers allow ready access to personal itms. The caddies are made of molded polypropylene copolymer with a drain hole in each compartment. Hardware is supplied with each model for proper attachment. DIMENSIONS: Inside dimensions are 11.25 x 2 7/8 x 7.75 inches. WEIGHT: Wheelchair carrier (70612-6100) is 2 pounds, walker caddy (70612-3200) is 1.3 pounds, and the crutch caddy (70612-3400) is 1.3 pounds
Hip Pocket
Wheelchair side pouch attaches to armrest with velcro straps. Cordura nylon. Hip pocket measures 10 1/2 inches long, 6 inches wide and 2 inches deep. Inside compartment with zipper closure. Colors: black, red, navy, royal blue, tan, brown, and light or dark gray.
Inglis Drink-Aide
The Inglis Drink-Aide is a cup with holder designed for use by individuals who use wheelchairs or who have limited upper body movement. Designed to enable independent hands-free drinking, this unit consists of a 28-ounce insulated water bottle; a long flexible, vibration-resistant drinking tube; and a universal clamp. The clamp enables the unit to be attached to a bed, a wheelchair, etc. OPTIONS: Extra drinking tubes.
Jazz Backpack
The Jazz Backpack is designed for use by wheelchais users with mobility or lower extremity disabilities or spinal cord injury. The large capacity main compartment has room for bulky items such as jacket and notebooks. It features a large front zippered pocket that is divided into two roomy compartments. Also features a foam-lined back and semi-rigid top that helps hold its shape so it’s easier to get things in and out. It is designed to hang on the seatback or push handles using web straps that
Just-A-Sac Wheelchair Bag
The Just-A-Sac Wheelchair Bag is a wheelchair back pouch designed for use by individuals who use wheelchairs. The pouch has one large, open-top pocket and attached loops slip over the wheelchair push handles. DIMENSIONS (WxH): 14 x 11 inches.
Kangapouch (Model 977)
The Kangapouch, model 977, is a wheelchair and walker caddy designed to afford people with mobility disabilities the ability to carry items with them. Made of corduroy, the Kangapouch features oversized, deep pockets and attaches to the front of a walker or the back of a wheelchair using Velcro straps. DIMENSIONS (LxW): 19 x 16.5 inches. COLOR: Assorted. WARRANTY: The manufacturer guarantees satisfaction with this product or it may be exchanged or returned for a full refund.
Large Cup Holder With Round Wheelchair Attachment
The Large Cupholder with Round Wheelchair Attachment is a wheelchair cup holder with attachment designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who use wheelchairs. Designed for round tube wheelchair frames, this device attaches to either side of the chair and secures to wheelchair's metal frame. To open the attachment door, the user folds the door down to form the base of the cup holder, and adjusts the arms to accommodate 16-ounce t
Large Cupholder With Square Wheelchair Attachment
The Large Cupholder with Square Wheelchair Attachment is a wheelchair cup holder with attachment designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who use wheelchairs. Designed for square tube wheelchair frames, this device attaches to either side of the chair and secures to wheelchair metal frame. To open the attachment door, the user folds the door down to form the base of the cup holder, and adjusts the arms to accommodate 16-ounce t
Large Glove Box
The Large Glove Box is an under seat caddy for a wheelchair or scooter designed for use by individuals with mobility disabilities. Made of water-resistant nylon, this caddy attaches under the seats of most scooters and motorized wheelchairs with the included hook-and-loop straps. DIMENSIONS: 12 x 5 x 9 inches.
Large Or Small Book / Utility Bag
Vinyl or sailcloth book/utility bag with loops to slide over push handles. Bags are made to custom sizes, with large being over 12 inches wide by 12 inches high by 2 inches deep and small being under 12 by 12 by 2. Wide color range.
Larger Crutch Bag For Wheelchair
The Larger Crutch Bag for Wheelchair is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a wheelchair. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a wheelchair and fits one pair of crutches in an upright position. It has a flap with a Velcro closure and a side pockets that are large enough to fit magazines o
Light Duty Magic Arm System
The Light Duty Magic Arm System is a lightweight adjustable mounting system which can be attached to a wheelchair, table, or bed to allow users to have greater independence. System has a single articulated extendable arm (14 inches long – 24 inches long) with two sections and a heavy-duty clamp. Mounts securely to any wheelchair, table or bedrail and holds up to 3.3 pounds.
Luggage Rack (Model 97)
The Luggage Rack, model 97, is designed for use with wheelchairs. This rack mounts to the wheelchair step tubes and extends back to support luggage.
Melrose Wheelbag Usa (Model 45182)
The Melrose Wheel Bag USA, model 45182, is a bag for wheelchair wheels for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who user a wheelchair. The bag holds up to four spare wheels in a protective padded compartments. Wheels are protected from scratches and marks. The bag keeps a person's wheels together so if that person is traveling with a team or a group of wheelchair users, his or her wheels are kept separate from other wheels. The b
Mini Oxygen Tank Holder For Wheelchairs (Model F706201001)
The Mini Oxygen Tank Holder For Wheelchairs, model F706202001, is a wheelchair oxygen cylinder carrying case designed for use by individuals with mobility and respiratory disabilities. It attaches to the handles and frame of the wheelchair and positions the tank behind the wheelchair to avoid interference with the user’s head or back. The tank holder is made of heavy duty waterproof nylon and has two pockets that can be used to hold one or two cylinders or other small supplies such as tubing.
Mini Pouch (Model 9)
Mini pouch attaches beneath the armrest on standard wheelchairs, armrest is loosened and straps slipped between the pad and arm of the frame. Single snap closure. Cordura nylon. 8 colors.
Monster Bag
The Monster Bag is designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The bag straps over the scooter or wheelchair seatback to provide storage for shopping, laundry, groceries, and more. The device is made from high quality water resistant polyester.
Mother's 3Rd Arm
Mother's 3rd Arm is a flexible, portable cup or baby bottle holder designed for use by children and adults with upper extremity disabilities. This device consists of a large cylinder affixed to a long flexible neck with a large clamp at the base. The adjustable clamp permits the device to be secured to the edges of tables or desks, the back of automobile seats, bed rails, or to the tubular frame of a stroller, wheelchair, or high chair. The cup or baby bottle is placed in the cylinder and the ne
Mother's Third Arm
Mother’s Third Arm is an adjustable cup and bottle holder that can be used by children and adults with limited arm and grasping strength. The user is able to access cups and bottles held with the Arm’s adjustable Velcro strap. The Arm has an easy-to-use clamp and a flexible tube that can be positioned in a variety of angles. It can be attached to wheelchairs, tabletops, strollers or highchairs.
Mulepack (Model 7012) & Mulepack Ii (Model 7013)
The Mulepacks are wheelchair back pouches designed to carry things for the person in a wheelchair. Each caddy is made of heavy urethane coated Nylon pack cloth with a strong poly webbing for the straps and 2-way zippers with steel rings for good grip when opening or closing. The Mulepack II (7012) has a main storage area with a wallet and key pouch and large envelope pocket. The Mulepack I has a main storage area and one front envelope pocket. The packs will fit wheelchairs with or without push
Multi Purpose 5 Pocket Pouch (Model 156)
The Multi Purpose 5-Pocket Pouch, model 156, is a wheelchair side pouch which may also be used on walkers. This transparent plastic carrying caddy features two adjustable hooks for fastening.
No-Slip Grip-Clip
The No-Slip Grip-Clip is a carrying aid for wheelchair, designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It consists of a wrap around strap with a strong aluminum spring activated karibiner clip that can be used to carry items on the front tubing of a wheelchair's frame. The clip holds the item to be carried and the strap a rubber pad embedded in the strap prevents it from sliding down the wheelchair tubing.
Nylon Back Pack (Model 16C005)
The Nylon Back Pack, model 16C005, is a wheelchair back pouch designed for use by individuals who use wheelchairs. Made of heavy- weight cordura nylon, this pouch carries small items and features nylon straps for hanging over wheelchair handles, two outside pockets, and Velcro closure flaps. DIMENSIONS: (HxW): 15 x 14 inches.
Oxygen Tank Holder (Model 16C204A)
The Oxygen Tank Holder, model 16C204A, is an oxygen carrying case designed for use individuals with respiratory disabilities who use wheelchairs. This nylon tank holder has two mounting straps that are adjustable to fit most wheelchairs. The top strap fits over the push handles of the wheelchair and the bottom strap fits over the tip bars. These straps are long enough to mount the oxygen tank off center to avoid contact with the user’s head and back. This case holds size D and E or other 4-inch
Oxygen Tank Holder For Wheelchair (Model F706201000)
The Oxygen Tank Holder, model F706201000, is designed to keep a cylinder of oxygen attached to the back of a wheelchair. The holder has a 5-inch inside diameter for insertion of size "E" or 4-inch diameter tanks. A 26-inch long tank is positioned off-center behind the wheelchair back to avoid interference with the wheelchair user’s head or back. The holder is made of heavy duty, waterproof black nylon.
Pack Rat Jr. Large Mini Pack
The Pack Rat Jr. Large Mini Pack is a wheelchair side pouch designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This unit allows the user to carry items on a wheelchair. It has a large zippered main storage compartment and a front expandable net pocket, with two Velcro straps on the back for attaching the pack to the wheelchair. On the front is a net pocket for holding smaller items safely and close at hand. The unit
Pack Rat Wheelchair Backpack
The Pack Rat Wheelchair Backpack is a wheelchair back pouch designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. Made from water resistant 600D PVC coated material, it has two large straps with loops for attaching to a wheelchair with or without a push handle. The pouch has two large zippered storage compartments. There is an opening for earphones attached to an MP3 player or radio stored in pocket in the front compa
PunkinFutz PunkinPie Accessible Bag
PunkinFutz PunkinPie Accessible Bag allows users to style their positioning chair, wheelchair, transfer chair, transport chair, or bicycle with the water resistant, highly reflective bag with easy access wide-pull zippers.
Quick Caddy Beverage Holder
The Quick Caddy Beverage Holder is a wheelchair drink holder or cup holder designed for use by individuals who use wheelchairs or walkers. This device consists of a strong stainless steel cage which mounts on any vertical or semi-vertical tube, rail, or pole using the attached flexible plastic mount with a hook-and-loop strap. The product comes with a foam "cozy" which securely holds soda cans or small water bottles. Without the cozy, the cage can carry larger 16-ounce glasses or larger water bo
RoboCup
The RoboCup is a patented portable holder designed for use by people who use a walker, wheelchair or mobility scooter and other individuals with a disability that affects their ability to hold or grasp objects. This portable dual caddy can securely hold two drinks, two fishing poles, tools, gear and personal belongings such as a telephone, keys, glasses and flashlight. The unit attaches to wheelchairs, walkers, scooters, grab bars, hospital beds or golf carts using the integrated clamp. The Robo
Roho Universal Cushion Cover With Pocket
The Roho Universal Cushion Cover with Pocket is a cushion cover with under seat pocket designed for use by wheelchair users. The cover has a durable stretch Lycra top and the side material is three-layer knit polyester spacer fabric which provides air circulation and cools the user. The attached pocket can be used to store small items such as wallets, keys, glasses, or coins. DIMENSIONS (HxWxD): Available dimensions range from 11 to 18 x 11 to 18 x 1 to 4 inches. WARRANTY: 6 months.
Round Mobility Clutch
The Round Mobility Clutch is a carrying bag designed for use by individuals with lower extremity, mobility, balance and walking disabilities. This oval carrying bag attaches to most canes, walkers, crutches, and wheelchairs or transport chairs with two hook-and-loop straps. The bag has an outside easy-access pocket that features an elasticized top and an interior zippered pocket for storing items such as keys, cell phones or other small items. The bag easily detaches and can be worn on the wrist
Sammon Preston Side Pouch For Wheelchair (Model 6441)
The Sammons Preston Side Pouch for Wheelchair, model 6441, is a wheelchair side pouch designed for use by wheelchair users. Designed for full length arm rest only, this pouch features a blue denim or black vinyl side pouch with full length zipper and 2 large side pockets. DIMENSIONS (HxW): 6 x 13 inches.
Sammons Preston Cup And Holder For Wheelchair (Model 1139)
The Sammons Preston Cup and Holder for Wheelchair, model 1139, is a wheelchair drink holder with cup designed for use by individuals who use wheelchairs. This device attaches to most wheelchairs, canes, and walkers. The unit features a cup with large open loop handle, snap on lid with opening, and two plastic coated spring clips for mounting. Once the attachment clip is installed onto the chair, the cup holder itself can be removed as needed. The cup holds up to 8 ounces of liquid and is dishw
Sammons Preston Mini Wheelchair/walker Pouch
The Sammons Preston Mini Wheelchair/Walker Pouch doubles as a carrying bag for a walker and a wheelchair side pouch for use by people with mobility disabilities. The machine-washable nylon pouch snaps over the front walker bar or hangs from the wheelchair armrest. DIMENSIONS (WxH): 10 x 8 inches. COLOR: Gray.
Sammons Preston Wheelchair Pouch
The Sammons Preston Wheelchair Pouch is a wheelchair back pouch designed to provide carrying capacity for wheelchair users. The expandable Codura nylon pouch is waterproof, stain-resistant, and machine-washable. It features a top cover flap and attaches to wheelchair push handles with loops. DIMENSIONS (WxHxW): 14 x 12 x 3 inches. COLOR: Gray.
Sammons Preston Wheelchair Shopping Bag (Model 6444)
The Sammons Preston Wheelchair Shopping Bag, model 6444, is a wheelchair back pouch designed to carry groceries or large personal items for people who use wheelchairs. The bag features hook and loop fasteners that reduces bag’s 5-inch width if less room is needed. The material is latex free. DIMENSIONS (WxH): 16.5 x 16.5 inches.
Scooter Arm Tote
The Scooter Arm Tote is a wheelchair side pouch designed for use by individuals who use scooters. This heavy canvas bag attaches to the scooter armrest and features one large inner pocket with easy-to-grasp zipper closure and a three-section mesh outer pocket. DIMENSIONS: 10.5 x 13.5 x 2 inches.
Scooter Basket Liner And Cover
The Scooter Basket Liner and Cover is a liner for scooter basket designed for use by individuals who use powered scooters. The protective cloth liner with cover fits inside a standard wire basket and holds shopping or other small items being transported in the basket. Items can be kept out of sight and dry by placing the included removable cover on top of the basket. The liner has carrying handles and an elasticized band that fits around the rim of the basket. The liner cover also features an el
Scooter Basket Liner Organizer (Model Ez0126)
The Scooter Basket Liner Organizer is a liner for a scooter basket designed for use by individuals with mobility disabilities or spinal cord injury. Made of nylon, the liner includes an adjustable drawstring to fit most baskets. There is a zippered front pocket for personal items (e.g. wallet, keys) and two mesh pockets to hold such items as cell phones, remote controls or beverages. DIMENSIONS (HxLxW): 11 x 13 x 10 inches. COLOR: Black.
Scooter Trailer
The Scooter Trailer is a wheelchair cart designed to equip a powered scooter to tow a child and/or cargo. The trailer is mounted on a single swiveling castor wheel. The trailer is attached to the scooter by means of a fixed hitch. There is a wire basket on the trailer enclosing a bicycle baby seat which is mounted on a wooden platform. The fixed hitch/wheel castor configuration allows greater maneuverability when reversing. PROTOTYPE DEVELOPMENT: Designed by Jim Rees for mothers who use scooter
Side / Armrest Bags
DO IT YOURSELF PURPOSE: To provide powered wheelchair users with carrying capability. Two pocket organizers designed for use on car visors were purchased from the automotive section of a local store. One organizer was strapped to each arm and the front strap of each was clamped under the armrest pad. TITLE: Side/Arm Rest Bags. REF: http://www.wheelchairmodifications.org. The organization can also be reached at Wheelchair Modifications, 5533 A Pony Farm Drive, Richmond, VA 23227.
Side Entry Backpack For Scooters (Model 70340)
The Side Entry Backpack for Scooters, model 70340, is a wheelchair back pouch designed to allow scooter users facilitated access to items in the caddy by means of a side opening rather than a top opening. The pouch includes a main compartment, kangaroo pouch, pen and pencil pouch, and front flap pouch. It attaches with adjustable straps or may be bolted to the seat back. The bag is made of 1000 Denier coated nylon Cordura. DIMENSIONS (HxWxD): 20 x 15 x 6 inches. COLOR: Royal blue, magenta, teal,
Side Entry Backpack For Wheelchairs (Model 70060)
The Side Entry Backpack, model 70060, is a wheelchair backpouch designed to eliminate the contortions necessary to open a standard zipper-style backpack or flap pouch from the chair. This backpack is accessed by opening the hex frame from the side. The caddy includes a main compartment, kangaroo pouch, pen and pencil pouch, and a front flap pouch. The bag is made of 1000 Denier coated nylon Cordura and attaches with 3/4-inch webbing with adjustable glides. OPTIONS: Backpack strap retainers avail
Side Kick Bag
The Side Kick Bag is an under seat pocket or wheelchair side pouch designed to provide carrying capacity for people who use wheelchairs. Made of nylon packcloth, this slimline pouch attaches on the inside of the armrest or under the seat and features a main zippered compartment with a ring pull and two smaller fromt pockets, one fleece-lined. DIMENSIONS (WxH): 12.25 x 7 inches. COLOR: Red.
Sidekick Wheelchair Bag (Model 162)
The Side Kick Wheelchair Bag, model 162, is a wheelchair side pouch designed for use by individuals with mobility disabilities or spinal cord injury. This denim wheelchair pouch hangs from the armrest. It has a covering flap that closes with Velcro, and hook-and-loop tab straps to hold the bag at armrest height. DIMENSIONS (HxW): 8 x 11 inches with 10-inch straps. OPTIONS: Monogram. COLORS: The bag comes in black, khaki, olive, teal, or blue denim. Monogram thread is offered in a choice of custo
Slice Jr. Large Mini Pack
The Slice Jr. Large Mini Pack is a wheelchair side pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made from 1200D/PVC material, the unit has a large zippered storage compartment, with two Velcro straps on the back for attaching to a wheelchair. Inside is an expandable net pocket. On the front is a zippered pocket for holding smaller items safely and close at hand. DIMENSIONS (HxWxD): Main compartment is 7.5 x 6.5 x 3 inches, with with a 5-inch wide zipper
Slice Wheelchair Backpack
The Slice Wheelchair Backpack is a wheelchair back pouch designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. Made from water resistant 1200D/PVC, this unit attaches to a wheelchair with or without a push handle using two adjustable sewn-on straps with metal hardware (metal buckles and 4-metal D-rings). The unit has a large zippered storage compartment, with zippers that open from either side. Inside is a large expan
Slim Jim
Wheelchair side pouch has zip closure on top, or flap with Velcro closure. Four outer pockets and securing strap at either end. 7 by 12 inches. Black or saddle vinyl.
Sports Pac, Neon Sportspac, & Junior Sportspac
The Sports Pac WH160SP, Neon SportsPac WH160N, and Junior SportsPac WH160J are wheelchair back pouches designed for sports wheelchairs. The bags have an adjustable strap system that fits over the back of the chair. They have a main compartment, outer pocket, lid pocket and two outside mesh pockets with Velcro closures. The Neon SportsPac is the same as the original SportsPac, but constructed of mixed neon colors in packcloth and cordura. The Junior SportsPac is sized for smaller chairs. Optional
Standard Saddle Armrest Bag
The Standard Saddle Armrest Bag is designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The device attaches to the users armrest bag by wrapping the fabric with the 2 inches hook strap over the top of your armrest and securing it to the 2 inch loop strap. Use the 5/8 inch hook and loop strap (located at the bottom of the bag) to secure it to the seat post or horizontal frame of the chair. Fits armrest from 1-inch round tubing to deluxe scooter armr
Standard Seatback Backpack
The Standard Seatback Backpack is a single compartment bag designed for use by wheelchair users with mobility or lower extremity disabilities or spinal cord injury. It includes straps that go over the seatback of the wheechair or scooter.
Stash And Flash Wheelchair Backpack
The Stash and Flash Wheelchair Backpack is a wheelchair back pouch designed for wheelchair users. The bag fits wheelchairs 14 to 18 inches wide without rubbing wheels and can be used with wheelchairs with or without handles. Features include netted pockets for holding water bottles and mobile phones within easy reach without having to open the bag. Other features include a reflective strip to improve visibility at night making it visible for drivers, zipped pockets for keys and other personal it
Supertote Carryall
The SuperTote Carryall is a wheelchair side pouch or a carrying bag for a walker or crutch designed to provide carrying capability for people with mobility disabilities. Made of durable machine-washable nylon, this tote features pockets with zipper closure. DIMENSIONS: 9.5 x 7 x 4.5 inches. COLOR: Blue or black.
Support Fixture For Powered Wheelchair
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a support fixture for a powered wheelchair for a woman with a progressive neurological disorder to travel independently away from the hospital with all her required medical pumps and support devices. This young woman is dependent on getting her food and medications through pumps attached to her powered wheelchair by a customized bracket. As her medical needs have increased she needed three additional pumps to meet her needs, but the bulk an
Thirst Free
Thirst Free is a wheelchair drink holder designed to provide hands-free carrying of beverages for individuals with mobility disabilities. The adjustable, plastic device features a wide body with a plastic ring to hold the cup. Molded clamps at the top and bottom of the device secure it to the side rails of wheechairs, bed rails, and the front horizontal bars of walkers.
Tms Wheelchair Pouch
Variety of wheelchair back pouches. Soft sided with cover flap. Strap loop on pouch slip over wheelchair push handles. Some with outer pockets. Variety of fabrics. Folds with wheelchair. DIMENSIONS: 14.5 x 12 inches or 14.5 x 17 inches. Specify narrow or regular wheelchair 12 or 14 inches wide.
Triumph Mobility Escape Rollator
Triumph Mobility Escape Rollator is an ergonomic walker specifically designed for those with limited mobility due to arthritis, osteoarthritis, or a stroke. The Triumph Mobility Escape Rollator is available in 3 seat height adjustments to fit almost any user from 4 feet 7 inches to 6 feet 7 inches and has a compact folding system that is easy to fold with a simple lift of the lock release handle. In addition, you can partly fold the Escape to pass through narrow doors and spaces. This design ma
Under Seat Wheelchair Pouch (Model 16C203)
The Under Seat Wheelchair Pouch, model 16C203, is an under seat pocket designed for wheelchair users. This device is designed to provide storage space under the chair and is accessible from the front by the wheelchair user. Made of nylon, it fastens with buckles. DIMENSIONS: (HxLxW) 12 x 11 x 16 inches.
Under The Seat Pouch
Under seat pocket measures 7 1/2 inches wide, 12 inches long, and 2 inches deep. Nylon. Velcro Closure. Attaches to frame under the seat with adjustable velcro straps to keep it hanging forward. Colors: black, red, navy, royal blue, tan, brown, and light or dark gray.
Universal Carry All
The Universal Carry All is a carrying bag for walkers designed to provide carrying capability for people with mobility disabilities. This heavy-duty nylon pouch secures to walker crossbars, wheelchairs, and bed rails and features one large compartment, a security pocket and eyeglass pouch, and a keypouch with cord. DIMENSIONS (WxL): 18.75 x 11 inches.
Universal Tote (Models Ez0101 & Ez0102)
The Universal Tote is a carrying bag for a walker or a wheelchair side pouch designed for use by individuals with mobility or walking disabilities or spinal cord injury. Made of nylon, this pack attaches with two adjustable straps to the front of a walker, and the smaller size (model EZ0102) attaches to the armrest of a wheelchair. An inner pocket can be accessed by opening a full-length zipper. There are two (model EZ0101) or three (model EZ0102) pockets on the outside. SIZES: Large (model EZ01
Ventilator Trays (Models 08-Pe, 08-Pi, 08-Pj, & 08-M)
Adjustable ventilator or respirator support tray mounts under the wheelchair seat between the rear tires. Model 08-P is a pull out model for power recliners, has 16 inches of travel; battery box holds batteries for wheelchair and back up battery for ventilator; available for Everest & Jennings or Invacare power recliners with LaBac Systems seating systems. Model 08-M is a lift out model for manual wheelchairs; rests on lower rail of chair, is 13 inches wide and 23 inches long with a one inch
Walker / Wheelchair Bag
The Walker/Wheelchair Bag is a carrying bag for a walker or a wheelchair back pouch designed to enable persons with mobility disabilities to transport personal items. Made of plastic-coated nylon with cotton binding, the bag features two reinforced pockets and attaches to the walker or wheelchair using hook-and-loop fasteners. The bag is mildew and fungus resistant and can be machine washed and dried. DIMENSIONS (LxH): 22 x 10 inches. COLOR: White.
Walker / Wheelchair Bag (Model M2930)
The Walker / Wheelchair Bag, model M2930, is a lightweight canvas bag that attaches to a walker or wheelchair and features outside compartments with a fold-over flap. COLORS: Asssorted.
Walker And Wheelchair Bags
The Walker and Wheelchair Bags are designed to provide carrying assistance for people who use whelchairs or walkers. All styles are made of washable packcloth (400 denier nylon with a waterproof coating) and feature Velcro straps to hold them in place. The Style A Walker Bag ($25) secures to the front bar and and legs of the walker with five Velcro straps and features flap closure and inside compartments. Style B ($15) is a saddle-bag style pouch and secures to the side of a walker or over a wh
Walker Carrier
CUSTOM ADAPTATIONPURPOSE: To enable an individual with mobility disabilities to carry a walker on a wheelchair. Designed for a wheelchair with two horizontal push bars on the back, the carrier is comprised of two sets of hooks that fit over the bars. Using extruded aluminum bars, two shorter hooks and two longer hooks were created by placing the aliminum bar in a vice and bending it to a 90-degree angle and then hammering out two pairs of curved shapes. The longer pair of hooks fit over the top
Wheelchair / Walker / Scooter Bag
The Wheelchair / Walker / Scooter Bag is a caddy, or carrying bag, for wheelchairs, walkers, and scooters designed for individuals with mobility, balance, and walking disabilities or spinal cord injury. This bag attaches using adjustable straps and clip fasteners. Made of 100 percent cotton duck with Velcro closure, this bag features an outside pocket with a zippered compartment to store a cell phone and interior slots to store credit cards and identification. For wheelchair use, the bag can be
Wheelchair / Walker Pouch (Model 16C002)
The Wheelchair / Walker Pouch, model 16C002, is a wheelchair side pouch and a carrying bag for walker designed for use by people with balance, lower extremity, mobility and walking disabilities, spinal cord injury and others who use a walker or wheelchair. Made of leatherette material, this pouch features a single pocket for storage of magazines or other small items. The pouch attaches over a cross bar and is held in place with dome snaps. The pocket fastens with Velcro closure. DIMENSIONS (LxW)
Wheelchair Arm Pouch (Model 16C003)
The Wheelchair Arm Pouch, model 16C003, is a wheelchair side pouch designed for use by wheelchair users. The pouch is designed to fit wheelchairs with desk-length arms and can also be used with walkers. It is made of leatherette material. DIMENSIONS: 8 x 9 inches.
Wheelchair Bac Pac (Models Wh165L & Wh165S)
The Wheelchair Bac Pacs are waterproof back pouches made of nylon with lock proof velcro straps for securing it to the handgrips of wheelchairs and easy access closures. Both the longer (WH165L) and shorter (WH165S) models offer small inside pockets for greater organization. DIMENSIONS: Model WH165L is 18 (h) x 16 (w) x 5 (d) inches; model WH165S is 12 (h) x 16 (w) x 5 (d) inches.
Wheelchair Back Carryon (Model Ez0060)
The Wheelchair Back Carryon, model EZ0060, is a wheelchair back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of weather-resistant nylon, this tote attaches using loop handles that slip over the wheelchair handles. The Wheelchair Back Carryon has large deep pockets. DIMENSIONS (HxLxW): 4.5 x 17.5 x 16.5 inches. COLOR: Black.
Wheelchair Back Pack, Vinyl (Model 16C004)
The Wheelchair Back Pack, Vinyl, model 16C004, is a wheelchair back pouch designed for use by wheelchair users. This large leatherette bag has a weather flap and an inside pocket. The bag accommodates large items such as sweaters, blankets, or larger daily living aids. DIMENSIONS: (LxW): 17 x 16 inches.
Wheelchair Backpack & Bookbag
Wheelchair back pouch 16 inches high, 15 inches wide and 7 inches deep. Children's size measures 12 by 12 by 5 1/2 inches. Cordura nylon. Two styles: Backpack has one large compartment with padded bottom. Bookbag has two compartments. Both have velcro closure and attach to handgrips with loops. Colors: black, red, navy, royal blue, tan, brown, and light or dark gray. Multicolor bags available.
Wheelchair Bag
CUSTOM ADAPTATION PURPOSE: To provide a means for a caregiver to carry items while pushing a wheelchair. A customized vinyl bag was made and held open and supported by a galvanized wire frame sewn into the top edge. A flap top and a return around the front and side edges protect the contents from the weather. Handles on each side of the center of the bag provide a means of carrying the bag away from the chair. Small straps made of the same material as the bag loop around the push handles of the
Wheelchair Bag (Model B2925)
The WheelChair Bag, model B2925, is a canvas bag with a front pocket and a velcro closure strap. COLORS: Assorted.
Wheelchair Bag (Models St130A, St130B & St130C)
The Wheelchair Bag, models ST130A, ST130B & ST130C, is a carrying bag designed for use by individuals with physical disabilities. The bag can be easily put on the arm of a wheelchair or the front of a walker. o a walker, and is made from medium weight canvas. Model ST130A has a side pocket. Model ST130B is the same as ST130A but has no pocket. Model ST130C has no pocket but is equipped with velcro straps. OPTIONS: Silk screening with a logo or message is available in a variety of colors. DIM
Wheelchair Bag.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bag which can be fastened over the arm of a wheelchair to carry small items. Pattern and instructions for a bag with straps, a side pocket and a zipper top, made with 1/2 yard of firm fabric, binding tape, tape or braid for the straps and a 12 inch zipper. SKILLS REQUIRED: Sewing. AUTHOR: Kernaleguen, A TITLE: Clothing Designs for the Handicapped REF: Edmonton, Alberta, Canada: University of Alberta Press: p 222-225 NARIC CALL NUMBER: R0866 PAGES (incl
Wheelchair Beverage Holder (Model Ad-500)
Clip on drink holder. Vinyl coated metal clips attach to wheelchair desk arms. Holder is lightweight plastic with adjustable Velcro closure to accommodate various sized containers.
Wheelchair Book Bag
DO IT YOURSELF PURPOSE: To provide powered wheelchair users with carrying capability. Use a standard soft briefcase or carry-on luggage bag that fits securely on the battery shroud of a powered wheelchair and is equipped with both hand carrying handles and a shoulder strap. Unhook one side of the shoulder strap, and thread the strap around the bottom of the back canes of the seat. Refasten the shoulder strap to the side of the briefcase. If the wheelchair is equipped with a tilting seat, the c
Wheelchair Briefcase
Wheelchair back pouch is a pedded, legal size bag. Cordura nylon. Two large compartments, one divided for pens, etc. Attaches to handgrips with loops that fold out of way when not in use. Colors: black, red, navy, royal blue, tan, brown, and light or dark gray.
Wheelchair Caddy
The Wheelchair Caddy is a carrying caddy designed for use by individuals who use wheelchairs. It mounts on the left or right side of most wheelchairs with an adapter and clamps (included). This caddy features three deep plastic wells to hold a wide variety of items, including beverages, food, pens, notebooks, and glasses. It can also be rotated to a variety of positions. A 12- ounce, microwave-safe beverage mug with a non-spill lid is included. DIMENSIONS (WxHxD): 12 x 3.5 x 7 inches. WARRANTY:
Wheelchair Carry All (Model Mf70616)
The Wheelchair Carry All, model MF70616, is a wheelchair back pouch designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury. Made of waterproof nylon with a rigid bottom liner, this bag attaches to the wheelchair’s handgrips with durable nylon straps. The bag has a top flap that closes with a hook-and-loop closure and a full width inner pocket for storing items such as carts, books, groceries or school supplies. DIMENSIONS (HxDxW): 14 x 4 x 14 inches.
Wheelchair Carry-All (Model 70616)
The Wheelchair Carry-All, model 70616, is a back pouch designed to attach to the handgrips of wheelchair push handles. This bag is made of waterproof denim with a rigid bottom liner and webbing straps. The caddy has a full-width pocket inside and a top flap that has a Velcro closure. DIMENSIONS: 14 x 14 x 4 inches.
Wheelchair Carry-On (Model 2503)
The Wheelchair Carry-On, model 2503, is a wheelchair back pouch designed for use by individuals with mobility disabilities or spinal cord injury. This pouch has adjustable straps that fit over the push handles of a wheelchair and large, deep pockets. The pouch is made of water-resistant nylon. DIMENSIONS (HxLxW): 17.5 x 4.5 x 16.5 inches. COLOR: Black.
Wheelchair Cart.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Two wheeled cart attaches to wheelchair, carries up to 45 pounds . A flexible hitch allows cart to swing directly alongside the side of wheelchair so wheelchair rider can load and unload cart independently. Four diagrams, 5 photographs, materials list and construction details. Estimated cost $ 15, estimated construction time 5 hours. Includes several hitching arrangements for different wheelchair models. SKILLS REQUIRED: Woodworking. AUTHOR: William Su
Wheelchair Cup Holder
The Wheelchair Cup Holder is a wheelchair drink holder designed for use by individuals who use wheelchairs. This holder can be attached vertically or horizontally on the right or left side. Side opening enable the unit to accommodate mugs with handles.
Wheelchair Cup Holder (Model F70622-0001)
The Wheelchair Cup Holder, model F70622-0001, is a wheelchair drink holder designed for use by individuals who use wheelchairs. This unit also clamps to walkers, rollators, bed rails, and other tubular frames and is equipped with a large lever knob to secure the clamp. The attached plastic holder holds glasses, cans, bottles and it is slotted on two sides to accommodate cups with handles. The holder is is accessible for use by right- or left-handed users. DIMENSIONS: The holder is 3.5 inches hig
Wheelchair Day Pac (Model Wdp12)
The Wheelchair Day Pac, model WDP12, is a wheelchair back pouch carrying accessory. Made in the USA of highly durable nylon fabrics with nylon tape bonded seams, this bag attaches to fit any chair with its Slipstrap System. Two pull rings allow for easy opening. DIMENSIONS: 12 x 12 x 4 inches. WARRANTY: Repair or replacement guarantee.
Wheelchair Day Pack
The Wheelchair Day Pack is a wheelchair back pouch designed for use by individuals who use wheelchairs. Made of weather-resistant nylon packcloth, this pack features a large capacity main compartment and roomy front zippered pockets. The bag hangs on the wheelchair push handles and has reflective tape for greater visibility. DIMENSIONS: The main compartment is 13.75 x 12.5 x 5 inches. The front compartment is 13.75 x 10.5 x 3.5 inches. COLOR: Royal.
Wheelchair Day Pack
The Wheelchair Day Pack is designed for wheelchairs users with mobility or lower extremity disabilities or spinal cord injury. The large bag can store bulky items such as jackets and notebooks and additionally it has two interior slash pockets for tucking away smaller items. Additionally, the bag can hang on push handles and web straps easily adjust to fit most 15 to 24 inch wheelchairs with push handles.
Wheelchair Lunch Pail
DO IT YOURSELF PURPOSE: To provide powered wheelchair users with the ability to carry food. A standard small soft-sided cooler or insulated square lunch carrier can be secured in the empty space below the wheelchair seat behind the user's legs. A belt or other similar strap is used to secure the bag to the front wheelchair cross member. MATERIALS: Soft-sided lunch carrier or small cooler and belt or strap. SKILLS REQUIRED: Assembly. TITLE: Lunch Pail. REF: http://www.wheelchairmodifications.o
Wheelchair Pack
The Wheelchair Pack is a wheelchair back pouch designed for use by individuals who use wheelchairs. This waterproof pack features large privacy compartments with zippered closure and deep side pockets for holding beverages, newspapers, or magazines. Other features include buckled straps that fasten over the seat loop handles that slip over wheelchair canes. A carrying handle is also included for use as a portable tote. DIMENSION (HxLxW): 5 x 15 x 15 inches. COLOR: Black.
Wheelchair Pack (Model Ez0200)
The Wheelchair Pack is a wheelchair back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of weather-resistant nylon, this pack attaches to the back of wheelchair seat using buckled straps that fasten over the seat back and loop handles that slip over the wheelchair handgrips. The Wheelchair Pack has a large interior compartment with zippered closure and deep side pockets as well as a carrying handle for use as a portable tote. DIMENSIONS (HxLxW): 5 x
Wheelchair Pack Carryon
The Wheelchair Pack Carryon is designed for use by wheelchair users with mobility or lower extremity disabilities or spinal cord injury. The zippered pack allows users to transport books or other items on their wheelchair. It features expandable side pocket for holding beverages, straps with adjustable buckles that securely attaches the pack to the back of the chair, and an outside mesh pocket to hold magazines and newspapers.
Wheelchair Shopping Box
DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a powered wheelchair to shop independently. A sheet steel box with its base above the client's knees was created. The box is high enough to accommodate a box of powdered detergent. The front of the box is lozenge shaped to match the plan view of wheelchair foot supports, and the lid is hinged at the back The high rim around the lid is 1/16 inch thick plastic, and there are gaps between it and the lid so that rain will not collect
Wheelchair Side Pac (Model Wh155)
The Wheelchair Side Pac, model WH155, is a carrying bag for wheelchairs made of waterproof nylon. The bag attaches to the inside of the wheelchair arm for greater security. Other features include a large main pocket, smaller pockets for wallets, checkbooks, pens, etc. and a lid zipper pocket with a large zipper pullring and pull tabs. DIMENSIONS: 10.5 x 6.5 x 2 inches.
Wheelchair Side Pouch
The Wheelchair Side Pouch is designed to provide carrying capacity for individuals. This pouch fits all wheelchairs with standard arms and it can be used on the inside or outside of the cahir. Made of self-lined vinyl, this pouch features a top zippered pocket and divided pockets on either side. DIMENSIONS: 6.5 x 12 inches. COLOR: Black.
Wheelchair Side Tote (Model Pt508)
The Wheelchair Side Tote, model PT508, is a carrying bag designed for attaching to a wheelchair for individuals with physical disabilities. This bag provides easy on/off handling and is equipped with adjustable velcro top straps. It is made from medium weight canvas. OPTIONS: Silk screening with a logo or message is available in a variety of colors. DIMENSIONS: 6.5 x 14 inches. COLORS: Body colors are natural, red, navy, royal, green and black. Assorted webbing and trim colors are available.
Wheelchair Single Oxygen (Models Ez0140 & Ez0141)
The Wheelchair Single Oxygen is an oxygen cylinder carrying case for a manual wheelchair designed for use by individuals with respiratory disabilities and mobility disabilities or spinal cord injury. Made of water-resistant 420-denier nylon, the case holds one or two "D" and "E" cylinders. An adjustable snap allows the carrier to be fitted to the size of the cylinder. An adjustable extra-long top strap with buckle attachment secures the case to most manual wheelchair seats, and it can be positio
Wheelchair Totebag
---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself tote bag for use on a wheelchair for individuals with mobility disabilities. While sitting in a wheelchair accessing pant pockets for storage of everyday items (i.e. diary, cordless phone, etc.) is difficult and not convenient. This convenient wheelchair tote bag is created from good quality canvas or corduroy material. About of a meter should be enough to do the job. Velcro is also needed to fit across the width of the sack
Wheelchair Underneath Carrier (Model Ez0160)
The Wheelchair Underneath Carrier is a wheelchair under seat carrier designed for use by individuals with mobility disabilities or spinal cord injury. Made of weatherproof, stain- and mildew-resistant mesh, the carrier has front and back flaps the keep items from sliding out on inclines. It hangs from the frame of the wheelchair directly beneath the seat using Velcro attachment straps. DIMENSIONS (HxLxW): 2 x 17 x 15 inches. COLOR: Black.
Wheelchair Underneath Carryon
The Wheelchair Underneath Carryon is an under seat pocket designed for use by individuals who use wheelchair. The unit attaches underneath the wheelchair to hold books, packages, and other small items. This large waterproof mesh carrier has a hanging design with Velcro attachment that features front and back stop flaps to keep items secure. The device is stain- and mildew- resistant. DIMENSIONS (HxLxW): 2 x 15 x 17. COLOR: Black